Fotospeed PD5 Print Developer 1 Litre
Fotospeed PD5 print developer is a phenidone/hydroquinone developer concentrate designed for black and white paper both resin coated and fibre based. PD5 is also suitable for processing sheet film.
Key Features:
- A phenidone/hydroquinone developer concentrate designed for black and white paper.
- Resin coated and fibre based.
- Suitable for processing sheet film.
- Dilute: 1+9.
Mixing Instructions
Paper: For resin coated and fibre based f papers dilutions of either 1+9 or 1+4 may be selected according to conditions outlined below.
| Dilution | Temperature | Development Time |
| 1+9 | 20 | 90-120 seconds |
| 1+4 | 20 | 45-75 seconds |
Film: A wide range of sheet film can be processed in Fotospeed PD5 where subsequent enlargement is limited. A dilution of 1+9 should be used and a development time of 4 minutes at 20°C with continuous agitation should be regarded as a starting point.
Capacity
The following table is for use with resin coated or fibre based paper.
| Dilution | 20x25cm Sheets / Litre |
| 1+9 | 50 |
| 1+4 | 70 |
Storage
A full tightly capped bottle of Fotospeed PD5 will keep for one year and a half full bottle for about four months. During use, Fotospeed PD5 will keep in good condition for about 24 hours in an open dish and for about one week in a deep tank with floating lid.
MPN: 2530
Rezensionen
Es gibt noch keine Rezensionen.